Original: $136.87
-65%$136.87
$47.90The Story
The Peli™ Vault V200 sits right in the sweet spot of the Vault range: bigger than the single-pistol V100, but still compact enough to sling in a car boot or gun-safe shelf without eating half the space. It's built for owners who want proper hard-case protection — a crushproof shell, a sealed lid, lockable latches — without paying for features they'll never use. Available in Black and Red.
Built Tough
The shell is high-impact polypropylene, moulded to resist crushing, dust ingress and driving rain, with a polymer O-ring running the full length of the lid to keep the seal tight. Two push-button latches snap the case shut in a second and pop open just as fast, while stainless-steel hinge pins and a padlockable hasp mean the case travels — and stays — secure. Worth noting: like the rest of the Vault range, the V200 is rated for weather and water resistance rather than full submersion; if a case needs to survive going underwater, Peli's Protector and Air lines are built for that instead.
Four Layers of Foam, Zero Guesswork
Every V200 ships with four layers of Pick N Pluck foam already inside. Pull the pre-scored cubes out by hand — no scalpel, no measuring, no trial and error — and in a few minutes there's a cavity moulded exactly around a handgun, an optic, or whatever else needs to ride safely inside. Because the foam is layered, the cavity can go as shallow or as deep as the gear demands, and it's easy to start again if the layout needs to change.
What It's For
Handguns and mounted optics are the obvious fit, but the V200's footprint works just as well for a mirrorless camera body with a couple of lenses, handheld instruments, or field electronics that need to survive being tossed in the back of a truck. Anything valuable enough to worry about and awkward enough that a soft bag won't cut it.
Where the V200 Earns Its Place
At the range, it's the case that goes from car boot to bench without a second thought — drop it, sit on it, stack another case on top, and the shell shrugs it off. On a shelf at home, the padlockable hasp turns it into light-duty secure storage between trips. And because it's a genuine step down in both size and price from the bigger Vault cases, it's the one people reach for when the gear list is short but the standards for protecting it aren't.
Technical Overview
Interior dimensions: 35.6 × 25.4 × 14 cm. Exterior dimensions: 39.1 × 33.2 × 15.6 cm. Internal volume: 0.013 m³. Body: polypropylene. Latches: two push-button, plus a padlockable hasp. Hinge pins: stainless steel. Foam: four-layer Pick N Pluck, included. Weight with foam: 2.29 kg. Colours: Black, Red.
Like every case in the Vault range, the V200 is backed by Peli's lifetime guarantee of excellence — buy it once, and it's built to still be doing the job years from now.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.

Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
The Peli™ Vault V200 sits right in the sweet spot of the Vault range: bigger than the single-pistol V100, but still compact enough to sling in a car boot or gun-safe shelf without eating half the space. It's built for owners who want proper hard-case protection — a crushproof shell, a sealed lid, lockable latches — without paying for features they'll never use. Available in Black and Red.
Built Tough
The shell is high-impact polypropylene, moulded to resist crushing, dust ingress and driving rain, with a polymer O-ring running the full length of the lid to keep the seal tight. Two push-button latches snap the case shut in a second and pop open just as fast, while stainless-steel hinge pins and a padlockable hasp mean the case travels — and stays — secure. Worth noting: like the rest of the Vault range, the V200 is rated for weather and water resistance rather than full submersion; if a case needs to survive going underwater, Peli's Protector and Air lines are built for that instead.
Four Layers of Foam, Zero Guesswork
Every V200 ships with four layers of Pick N Pluck foam already inside. Pull the pre-scored cubes out by hand — no scalpel, no measuring, no trial and error — and in a few minutes there's a cavity moulded exactly around a handgun, an optic, or whatever else needs to ride safely inside. Because the foam is layered, the cavity can go as shallow or as deep as the gear demands, and it's easy to start again if the layout needs to change.
What It's For
Handguns and mounted optics are the obvious fit, but the V200's footprint works just as well for a mirrorless camera body with a couple of lenses, handheld instruments, or field electronics that need to survive being tossed in the back of a truck. Anything valuable enough to worry about and awkward enough that a soft bag won't cut it.
Where the V200 Earns Its Place
At the range, it's the case that goes from car boot to bench without a second thought — drop it, sit on it, stack another case on top, and the shell shrugs it off. On a shelf at home, the padlockable hasp turns it into light-duty secure storage between trips. And because it's a genuine step down in both size and price from the bigger Vault cases, it's the one people reach for when the gear list is short but the standards for protecting it aren't.
Technical Overview
Interior dimensions: 35.6 × 25.4 × 14 cm. Exterior dimensions: 39.1 × 33.2 × 15.6 cm. Internal volume: 0.013 m³. Body: polypropylene. Latches: two push-button, plus a padlockable hasp. Hinge pins: stainless steel. Foam: four-layer Pick N Pluck, included. Weight with foam: 2.29 kg. Colours: Black, Red.
Like every case in the Vault range, the V200 is backed by Peli's lifetime guarantee of excellence — buy it once, and it's built to still be doing the job years from now.



















